Cisco Systems 2 Security Camera User Manual


 
3-17
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 3 Configuring VSM
Configuring VSM
Figure 3-22 New Password Field
c. In the Confirm Password field (see Figure 3-23), reenter the password.
Figure 3-23 Confirm Password Field
Step 7 Click the Submit button to add the encoder.
Step 8 Repeat Step 4 through Step 7 as needed to add other video encoders.
Adding Analog Cameras
Adding analog cameras is the process of configuring information about the analog
cameras that will operate in your VSM deployment. This information includes the
name of each camera and information about its video stream.
Before you can add analog cameras, you must configure video encoders as
described in the
“Adding Video Encoders” section on page 3-11. If you will not
use analog cameras, skip this section.