Filter
Top Products
2-19
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 2 Setting Up and Configuring the Multi Services Platform
Performing the Initial Configuration of the Multi Services Platform
Figure 2-10 Network Address Setup Area
Step 5 Make sure that the Address tab is selected in the Network Address Setup area,
then take these actions:
a. Click the Static Address Setup radio button.
b. In the IP Address field, enter the IP address for the server.
c. In the Subnet Mask field, enter the subnet mask for the server.
d. If you need to assign a default gateway, click the Routing button and continue
to
Step 6. Otherwise, skip to Step 7.