Filter
Top Products
Chapter 2 Setting Up and Configuring the Multi Services Platform
Performing the Initial Configuration of the Multi Services Platform
2-28
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Figure 2-21 NTP Server Area
Step 10 In the NTP Server area, take these actions:
a. In the Address field, enter the IP address or host name of your NTP server.
b. (Optional) Click Test to make sure that the Multi Services Platform can
access the NTP server.
c. Check the Use for Initial Synchronization check box.
d. Click OK.
Step 11 In the Advanced NTP Configuration screen, click Finish.