Cisco Systems 2 Security Camera User Manual


 
Chapter 3 Configuring VSM
Configuring VSM
3-20
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Figure 3-28 Description Field
c. From the Status drop-down list, make sure that Enabled is selected, as shown
in
Figure 3-29.
Figure 3-29 Status Enabled
d. From the Encoder drop-down list (see Figure 3-30), choose the video encoder
that the camera connects to.
This list displays the video encoders that you added as described in the
“Adding Video Encoders” section on page 3-11.