Filter
Top Products
Chapter 3 Configuring VSM
Configuring VSM
3-26
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Figure 3-39 Quality Slider
Step 7 Click the Submit button to add the analog camera.
Step 8 Repeat Step 4 through Step 7 as needed to add other cameras.
Adding IP Cameras
Adding IP cameras is the process of configuring information about the IP cameras
that will operate in your VSM deployment. This information includes the name of
the camera, information about its video stream, and its log in credentials.
IP cameras (also called network cameras) connect directly to an IP network and
do not require separate encoders.
If you will not use IP cameras, skip this section.
Procedure
Step 1 Access the VSOM Operations Manager as described in the “Accessing Video
Surveillance Operations Manager” section on page 3-5