Cisco Systems 2 Security Camera User Manual


 
2-17
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 2 Setting Up and Configuring the Multi Services Platform
Performing the Initial Configuration of the Multi Services Platform
Figure 2-8 YaST2 Window
Step 3 In the YaST2 window, make sure that the Traditional Method with ifup radio
button in the Network Setup Method area is selected (see
Figure 2-8), then click
Next.
Step 4 Take these actions:
a. Make sure that the first controller that is listed in the Network Card
Configuration Overview area is selected, as shown in
Figure 2-9.
Note The network cards that appear on your system may be different than
the ones shown here.