Filter
Top Products
3-33
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 3 Configuring VSM
Configuring VSM
–
To choose UDP multicast, click the UDP radio button, then in the
Multicast Address field enter the multicast address that camera should
use to multicast the video to VSMS
Figure 3-52 Transport Option
f. From the Bitrate drop-down list (see Figure 3-53), choose the bit rate for the
video stream from the camera.
The Bitrate drop-down list appears only if you chose MPEG-2, MPEG-4, or
H.264 for the media type.
Figure 3-53 Bitrate Drop-Down List