Cisco Systems 2 Security Camera User Manual


 
Chapter 3 Configuring VSM
Configuring VSM
3-24
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
To choose Universal Datagram Protocol (UDP) unicast, click the UDP
radio button
To choose UDP multicast, click the UDP radio button, then in the
Multicast Address field enter the multicast address that the video encoder
should use to multicast the video to VSMS
Figure 3-36 Transport Option
f. If the Bitrate drop-down list appears (see Figure 3-37), choose the bit rate for
the video stream from the camera.
The Bitrate drop-down list appears only if you chose MPEG-2, MPEG-4, or
H.264 for the media type.
Figure 3-37 Bitrate Drop-Down List