Filter
Top Products
Chapter 3 Configuring VSM
Configuring VSM
3-10
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Figure 3-12 Host IP/Name Field
g. Click the Submit button to add the server.
h. Repeat this Step 3 for each server on which you will run VSMS.
Step 4 If you will use VSVM, take the following actions to configure the server that will
run VSVM:
a. Click Servers under Devices in the left panel of the VSOM Operator page, as
shown in
Figure 3-7 on page 3-7.
The Servers area appears.
b. In the Servers area, click Add a New Server, as shown in Figure 3-8 on
page 3-8.
c. In the Server Information area in the Details tab, choose Video Surveillance
Virtual Matrix (VSVM) from the Server Type drop-down list, as shown in
Figure 3-13.