Filter
Top Products
Loading Paper 19
7. Maintain a constant pressure against the paper until the printer pulls the paper in
slightly. Continue to apply light pressure until the paper begins feeding, then let
go to allow the printer to adjust the paper position.
8. Open the cover and look down into the printer to make sure the paper is straight
and has fed all the way.
If the paper hasn’t fed completely and the edge is visible, press the z roll paper
button for 3 seconds to back the paper out. Press the ) paper button to clear the
paper out error, then load the paper again.
9. Before printing, select Manual - Roll as the Source setting (Windows) or
Manual - Roll as the Paper Source setting (Macintosh) in your printer software
(see page 26 for Windows or page 31 for Macintosh).
Paper is loaded correctly If edge is visible, reload paper