Filter
Top Products
Maintaining Your Printer 79
5. Shake the new cartridge four or five times before
opening its package. (Don’t shake it after it’s
unpacked.)
6. Remove the new cartridge from its package.
7. Slide the new cartridge into its slot. The side with the green circuit board goes in
the front of the slot.
8. Press the cartridge down until it clicks into place.
9. If you need to replace any other ink cartridges, repeat steps 4 through 8.
10. Close the cartridge cover, press it down on the top until it clicks, then close the
printer cover.
11. Press the
H ink button. The printer begins charging the ink delivery system.
The green P power light and red H ink lights flash and the printer makes noise.
Charging takes about 90 seconds. When it’s finished, the green P power light
stops flashing and stays on. The red H ink light and the light(s) above the
cartridge(s) go out.
Caution: Never turn off the printer while the green P power light is flashing,
unless the printer hasn’t moved or made noise for more than 5 minutes.
Caution: Don’t touch the green circuit board on
the front of the cartridge; you may inhibit normal
operation and printing.