Filter
Top Products
M3099EX/EH OEM ManualB-8
B3.6 Adjusting LCD contrast
When you adjust the LCD contrast, you must set as follows.
23 At Screen 2, press [Mode 1] six times to go to
the LCD CONTRAST screen. (Screen 19)
24 Press [Mode 2] to see Screen 20. The number
of ‘ ’ is increased and the LCD contrast is
getting darker.
25 At Screen 20, the LCD contrast is set in 16
steps each time you press [Mode 1]. When all
fields are filled by ‘ ’, next pressing [Mode 1]
stars from all ‘ ’ (The lightest contrast).
26 Press [Mode 2] to see Screen 19. The settings
are stored to EEPROM.
27 When you close the setup mode, go to 9 .
B3.7 Setting pick speed
When you set the pick speed, you must set as follows.
28 At Screen 2, press [Mode 1] seven times to go
to the PICK SPEED SET screen. (Screen 21)
29 Press [Mode 2] to see Screen 22. (The default
setting is “FAST”.)
If “FAST” is displayed, the pick speed is fast.
If “SLOW” is displayed, the pick speed is
slow. The “FAST” or “SLOW” status flips
each time you press [Mode 1].
The status will be set in EEPROM
automatically.
30 If you want to return to Screen 21, press
[Mode 2]. When you close the setup mode,
go to 9 .
<< SETUP MODE >>
LCD CONTRAST
LCD CONTRAST
Screen 20
Screen 19
<< SETUP MODE >>
PICK SPEED SET
PICK SPEED SET
FAST SLOW
Screen 21
Screen 22