Filter
Top Products
M3099EX/EH OEM Manual B-11
SETUP MODE
39 Press [Mode 1] and [Mode 2] at a time to see
Screen 25. The settings are stored to
EEPROM.
40 When you close the setup mode, go to 9.
B3.14 Setting picking time
When you set the picking time, you must set as follows.
41 At Screen 2, press [Mode 1] fourteen times to
go to the PICK TIMER screen. (Screen 27)
42 Press [Mode 2] to see Screen 28. (The default
setting is 2 sec.)
43 At Screen 28, press [Mode 1] until the digit
you want to change blinks. Then press [Mode
2] until the digit changes as you want. (The
specifiable range is from 0.5 to 99.5 sec. in
0.5 sec. step.)
44 Press [Mode 1] and [Mode 2] at a time to see
Screen 27. The settings are stored to
EEPROM.
45 When you close the setup mode, go to 9 .
B3.15 Setting time-out limit
When you set the time-out limit, you must set as follows.
46 At Screen 2, press [Mode 1] fifteen times to
go to the TIME-OUT SET screen. (Screen
29)
47 Press [Mode 2] to see Screen 30. (The default
setting is 30 sec.)
<< SETUP MODE >>
PICK TIMER
Screen 27
<< SETUP MODE >>
X X . X S
Screen 28
<< SETUP MODE >>
TIME-OUT SET
TIME-OUT SET
X X X X S
Screen 30
Screen 29