Filter
Top Products
114 Operating manual RX600 S4
Opening/closing the housing CSS components
8.3 Opening/closing the housing
V CAUTION!
The actions described in this section may only be performed by
personnel with the appropriate technical training. Any unauthorized
openings and improper repairs could expose the user to risks
(electric shock, fire hazards) and could also damage the equipment.
V CAUTION!
The housing cover must be replaced as soon as possible for purposes of
cooling, to comply with EMC regulations (regulations regarding electro-
magnetic compatibility) and to prevent fires.
Figure 44: Opening the housing
–To open the housing, release the two screws (1) at the front, push the cover
back by approx. 1 to 2 cm and lift off the housing cover.
–To close it, put the cover on the housing and pull it forwards until the cover
closes. Then tighten the two screws (1) at the front again.
11