Filter
Top Products
RX600 S4 Operating manual 21
2 Overview of the installation steps
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê At first, please take notice of the safety instructions in chapter “Important
information” on page 23 and following.
Ê Transport the server to the place where you want to install it.
Ê Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section “Unpacking the server” on page 38).
Ê Make sure that all necessary manuals (see “Documentation overview” on
page 8) are available; print out the PDF files if required.
Ê Fit the server in the rack (see section “Rack installation/removal of server”
on page 39).
Ê Wire the server. Follow the instructions in the sections “Connecting devices
to the server” on page 49 and “Notes on connecting/disconnecting cables”
on page 54.
Ê Connect the server to the mains (see section “Connecting the server to the
mains” on page 52).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section “Controls and indicators” on page 55).