Filter
Top Products
RX600 S4 Operating manual 69
Starting up and operation Configuring the server
5.3 Configuring the server
This section contains information about configuring the server and installing the
operating system.
I Make sure that the energy saving functions are disabled in the BIOS
Setup during server operation.
5.3.1 Configuring onboard SAS RAID controller
You can configure the RAID either before or during ServerStart. Using Server-
Start is recommended.
The onboard SAS RAID controllers are configured either with the WEBBIOS
Configuration Utility (call with CTRL-H during BIOS POST) or with the Server-
Start disc 1 using ServerViewRAID.
More information can be found in the controller documentation on the Server-
Books DVD under “Controllers”.
I Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files on the driver
CDs.