Filter
Top Products
RX600 S4 Operating manual 59
Starting up and operation Controls and indicators
5.1.1.3 Indicators on the accessible drives/components
CD/DVD drive activity indicator
Lights up green when the storage medium is being accessed.
ServerView Local Service Display
You can use the slot mechanism to pull out the ServerView Local Service
Display from the server housing and read the information. Press the front of the
module to release the lock.
You can also pivot the ServerView Local Service Display down by an angle of
120° from its normal position. This makes reading easier when the server is
located very high in the rack.
Further information on using the ServerView Local Service Display is provided
in the "LocalView" manual.
Power-on indicator (green/orange)
Lights up green when the server is switched on and ready.
Flashes green when the server is switched on and is in sleep
mode (ACPI state S1).
Lights up orange when the server is switched off (ACPI state S5).
Does not light when the server is switched off.
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
The ID indicator can also be activated via ServerView S2 and its
status reported to ServerView S2.