Filter
Top Products
105
H4D
21
Bracketing setting
The Bracketing function is set in the following manner:
1) Press the MENU button.
2) Turn the front control wheel until Bracketing appears
3) Press Enter (ISO/WB) button on the grip
4) Turn the front control wheel to access the options, that are:
Number of Captures (the number of captures required in the sequence)
Sequence (the sequential order of the over- or underexposures)
Step (the amount of EV variation from the standard exposure setting)
(A drop shadow will be displayed beneath the selected symbol, for
example
)
5) In
turn the rear wheel to choose the number of frames
required: 2, 3, 5, 7 or 9.
6) In turn the rear wheel to choose one of four sequences:
A: Standard, Over, Under
B: Standard, Under, Over
C: Over, Standard, Under
D: Under, Standard, Over
7) In turn the rear wheel to choose the amount of EV variation
required: 3, 2, 1, 1/2, 1/3 EV.
8) Press SAVE (ISO/WB button) to save the setting.
9) Press ENTER (ISO/WB button) again from the Bracketing screen
to activate the function. Press On (AF button). Note that this now
reads Off and the line of text at the bottom of the screen reads
‘Bracketing on’.
Half-press the shutter release button to standby mode for this
function (press the shutter release button again (full press)
for activation) or full-press the shutter release for immediate
activation.
To escape from this mode press MENU, then Enter (ISO/WB
button on the Bracketing screen, then Off (AF button).
Step highlighted.
1/3 EV variation chosen as
option.
Screen after Bracketing setting
activated indicating 3 frames
remaining in a Standard, Over,
Under, sequence with no adjust-
ment to the next frame.
Viewnder display indicating
no adjustment to next frame
and three frames left in the
sequence.
EXAMPLE EXAMPLE
MENU
F
Enter
ISO/WB
F
R
R
R
Save
ISO/WB
ISO/WB
Enter
ON•OFF
PROFILES/ESC
Note
The default setting is a shutter speed change in a bracketing
sequence. However, if the camera is set in Manual mode, you can
choose an aperture change instead (Custom Options - Bracket
param. in Manual #25)
Note
As an example, a 5 frame sequence with an EV 1 variation
setting at ‘Standard, Over, Under’ would produce: Standard (O EV
variation), +1EV, -1EV, +2EV, -2EV.
43
5 6
Number of captures highlighted.
3 captures chosen as option.
Sequence highlighted.
‘Standard, over, under’ chosen
as option.
A B C D
7 8
9