Filter
Top Products
88
H4D
Tip
Use the delete shortcut immedi-
ately after an unwanted capture
to save space on a card.
Tip
One way of working is to simply assign unwanted images
as Red. In this way, you retain the option (for a while) of
changing your mind later while allowing the system to
automatically delete the unwanted images as the storage
medium lls up.
Note
You will always be asked to
conrm each delete operation.
3. Press to open the
Delete Image
dialog.
4. You must now select the approval status that you wish to
delete. All images on the CF card that are also of the status
that you select here will be deleted by the operation.
Use and to select
All Red
,
All Red & Yellow
or
All
.
5. Then press to open the delete dialog for the selected status.
You are now asked to conrm the delete.
6. • Toconrm,pressthe
+
button to change the status to Yes
and then press the OK button to execute the delete.
• Tocancel, pressthemenubutton to exit; orpress the
–
button to set the status to No and then press the OK button
to cancel.
You now return to the main menu. Either move on to another
setting by using the navigator button or
7. Press the menu (
EXIT
) button to exit the menu system.
Transferring images
Transferring to a computer
To transfer images stored on the compact-ash card to your
computer, simply connect the sensor unit to a computer using
a FireWire cable and then run Phocus. Alternatively, use a card
reader and connect to a computer. See the Phocus user manual
for details.
3
4
5
6 7