Filter
Top Products
Advanced network settings
The HP Media Vault Network Settings screen contains settings to
view or change the following:
HP Media Vault name
MAC address
Network security mode
Network protocol settings
To access the Network Settings screen:
Double
-
click the
HP Media Vault
icon on your
desktop.
Click
Customize your HP Media Vault
’
s settings
.
If the
Welcome Screen
appears, click
Configure Device
.
Click the
Network Settings
tab.
Change the HP Media Vault name
To change the name of the HP Media Vault, see
Change the name of your HP Media Vault
.
MAC Address
This displays the MAC (
Media Access Control Address
) address, which is located on the back of your media
vault.
Network security mode
To change the security mode, see
Enhance security on your Shared Folders
.
Network protocol settings
Use these settings
to configure IP protocol settings for the media vault. In most cases, the default network settings
will work without any changes. The following options are available:
Auto
-
Configure IP Settings
This is the default setting for the media vault. When this option is selected:
The media vault automatically acquires its IP address and IP settings from the DHCP (
Dynamic Host
Configuration Protocol
) server on your network.
Renew DHCP will automatically renew itself.
The values of the
IP Address
,
Gateway Server
,
Subnet Mask
,
Domain Extension
,
DNS
Servers
, and
WINS Servers
set by the DHCP server are displayed.
Manually Configuring IP Settings
If you use a static IP address, you may want to manually configure the IP settings on the media vault.