Filter
Top Products
This should be done only by experienced network administrators.
To manually configure the settings
1.
Obtain the DNS server information from your internet service provider or use an existing IP address.
2.
In the
IP Address
box, enter a unique IP address.
3.
In the
Gateway Server
box, enter the IP address of your Gateway/Router.
4.
In the
Subnet Mask
box, enter the same subnet used in your other network devices.
5.
In the
Domain Extension
box, enter your domain extension.
6.
In the
DNS Server
boxes, enter the IP addresses.
Note
: Entering two DNS servers is recommended for stability.
7.
If required by your network configuration, in the
WINS Server
boxes, enter the IP address.
8. Click
Accept
or
Cancel
. (If you click
Cancel
, your changes will not be accepted.)
Network security considerations
Network security depends not only on the security setting of the Media Vault, but on the settings and capabilities
of all hardware and software on your LAN (Local Area Network). For more information, see
Secure your HP
Media Vault from intruders
.