Filter
Top Products
10.
Power up the system.
You can now use the additional hard drive. (For information on formatting the hard disk, see
Format a
disk
.)
To remove an internal expansion:
1.
Power down the media vault by pressing the power button on the front of the unit and wait until
it
completely shuts off.
2.
Turn the security knob counter
-
clockwise.
3.
Lift the drive tray handle out and gently pull the hard drive tray out of the expansion bay.
4.
Use a screwdriver to unscrew the four screws.
5.
Remove the hard drive from the tray. To prevent losing the tray, insert the empty tray back into the media
vault.
6.
Power the system back up to use the single internal drive.
Removing hard disks can cause unexpected and undesirable behaviors. If the media vault has
volumes
that span across
multiple disks, removing any one of the disks will make the whole volume
unusable (at least until the disk is reconnected).