Filter
Top Products
105
Editing
If you have recorded numerous short
scenes, combining them can be
convenient.
Be sure to select consecutive multiple
scenes. When using the HDD or a
DVD-RAM, combining scenes is
possible only if “Category: All” is
specified (p.86, 114).
Stills cannot be combined.
Combining Multiple
Scenes
(Edit – Combine)
1
Press , then press
MENU
.
2
Select “Scene” “Edit”
“Combine”, then press the confirmation
button.
The “Combine Scenes” screen
appears.
3
Move the cursor to the first scene you
wish to combine, then press the
confirmation button.
The cursor turns to 2-color (blue
and yellow) frame.
• If you press MENU before
pressing the confirmation
button, the Submenu appears
(p.103).
4
Move the cursor to the last scene to be
combined, then press the confirmation
button.
The red cursor surrounds all the
scenes to be combined.
The cursor at the last scene turns to
2-color (red and yellow) frame.
HDD RAM
-RW (VR)
5
Press the confirmation button if no
change is needed.
The confirmation screen that
shows the top and last scenes
appears.
• If you need to change the
combining range, press C. The
color of the cursor returns to
yellow and you can reselect the
scene.
6
Select “YES”, then press the
confirmation button.
The scenes in the specified range will
be combined, then the screen will
return to the beginning of step 3. (On
the thumbnail, the first scene of the
combined range of the scenes will
appear.)
• You can combine other scenes
by repeating the procedure from
steps 3 to 6.
• To quit combining scenes, select
“NO” before pressing the
confirmation button. The screen
after pressing the confirmation
button in step 3 will be restored.
Press C to deselect the range
cursor, then the screen returns to
the beginning of step 3.
7
Press C to end the procedure.
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 105 Friday, September 12, 2008 8:22 PM