Hitachi DZ-HS903A Camcorder User Manual


 
146
Connecting to Your PC
z The provided software does not
import the camcorder’s editing
features, such as the fade
settings and Playlist contents.
z If the camcorder is connected via
a USB hub or to a USB port on the
PC’s front panel or keyboard, the
camcorder may not be recognized
by the PC. If this happens,
connect the camcorder to a USB
port on the PC’s rear panel.
z If the camcorder power is off, it
cannot be connected to a PC.
z Do not use a PC application to
finalize a DVD-RW/DVD-R
recorded on this camcorder.
Doing so will make the disc
unusable.
z Although reading data from the
camcorder or writing data to the
camcorder may be possible using
software other than the provided
software, operation is not
guaranteed.
z If the PC is started from suspend
mode (or sleep or standby) with
the camcorder connected to the
PC, the camcorder may not be
recognized. Disconnect the
camcorder from the PC, and
restart the PC.
z Multiple camcorders cannot be
connected to the PC at the same
time.
z Although it is stated that discs
created using the provided
software can be played back on
devices compliant with those
respective disc types, playback
on all devices is not guaranteed.
There are instances when
playback is not possible
depending on the playback device
or disc recording condition.
z Inquiries on the software
provided with this camcorder
should be directed to the
following.
Support Center phone numbers
for software provided:
PIXELA CORPORATION
+1-800-458-4029 (Toll-free)
+1-213-341-0163
URL:
http://www.pixela.co.jp/oem/
hitachi/e/index.html
z For inquiries on connecting a PC
to this camcorder:
Hitachi Camcorder PC Software
Support Center
URL:
http://dvdcam-pc.support.hitachi.ca/
Contact Information
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 146 Friday, September 12, 2008 8:22 PM