Filter
Top Products
83
Dubbing on DVD
This option allows you to collectively
dub all scenes recorded on the HDD
on the same day.
Dubbing All Scenes
Recorded on the Same
Day (“Date”)
1
Connect the AC adapter/charger to
the camcorder (p.38).
• Dubbing is not possible if a
battery pack is used as a power
source.
2
Turn the power switch to “HDD”
(p.24).
3
Press
DUBBING
.
The Dubbing Menu appears.
4
Select “Date”, then press the
confirmation button.
The “Select Date” screen
appears.
5
Select a date for dubbing, then press
the confirmation button.
6
Choose a disc for dubbing and insert
it into the camcorder (p.34).
Select Date
03
12/10/2008
01
12/ 1/2008
02
12/ 5/2008
ENTER
04
12/15/2008
7
Check the screen for finalization
setting.
If you are using a DVD-RW (VF
mode) or DVD-R, you can
finalize the disc continuously
after dubbing is complete.
Select “YES” to finalize or
“NO” not to finalize.
8
Select “YES“, then press the
confirmation button.
Dubbing starts.
9
When another disc is needed to
continue dubbing, a message screen
requesting another blank disc
appears. Replace a disc with a new
one.
10
After the dubbing is complete, the
confirmation screen whether or not
you delete the dubbed scenes
appears.
• If you wish to erase the dubbed
scenes, select “YES”.
• If you wish to leave them on
the HDD, select “NO”.
11
Remove the disc.
•Or press C to end.
Hint
You can also display the Dubbing
Menu from the Disc Navigation
screen. Press , press MENU,
select “Scene” “Dubbing”
“Dubbing Menu”, and then press
the confirmation button.
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 83 Friday, September 12, 2008 8:22 PM