Hitachi DZ-HS903A Camcorder User Manual


 
171
Additional Information
Block noise in playback image,
momentary stop of playback image
Sound interrupted during playback, or
abnormal sound
Blue thumbnail display* (Fig. 1)
Disc cannot correctly be recognized
Disc cannot be initialized
Delay between video and audio
A recording of one scene may be divided into plural scenes, or a portion of a scene
may not be recorded
Recording/Playback is not possible
Note when transferring this camcorder or discarding discs and SD
memory cards
The “Format” function on this camcorder will only change the file control information.
It will not completely delete the data in the built-in hard disk and your personal data
could leak out. To prevent the data from leaking out, execute complete deletion of the
HDD following the procedures below.
1 While the camcorder is in HDD record pause mode, press , then press MENU.
2Press f/e to select “HDD Setting”, then press c.
3Press f/e to select “Full Format”, then press the confirmation button.
4Press d to select “YES”, and then press the confirmation button to confirm the
setting and begin HDD full format.
“Formatting” or “deletion” using the functions of the camcorder or a PC will change
only the file control information. It will not completely delete the data on disc or
memory card.
When transferring or discarding a disc or memory card, it is recommended that you
physically destroy it or use deletion exclusive software (generally available) to
completely delete the data on it. It is user's responsibility to control the data on disc and
memory card.
Hitachi will not accept any responsibility for leaking of personal data.
Block noise
1/6All
scenes
PLAY
PHOTO
SELECT
F
i
g. 1
*
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 171 Friday, September 12, 2008 8:22 PM