Filter
Top Products
24
2. CONTROLS, INDICATORS AND CONNECTORS
●
Status 2
This screen displays the camera setup statuses.
Event display is not available while this screen is displayed.
●
Status 3
This screen only displays date and time, event display and warning indications.
* Whether or not date and time should be displayed and the display style are set on the TIME/DATE MENU screen.
☞ page 45 “Displaying the Time and Date on the Screen”
Indication Indication Contents
FULL AUTO ON, OFF
GAIN –3 dB, 0 dB, 3dB, 6 dB, 9 dB, 12 dB, 15dB, 18 dB, LOLUX, ALC
SHUTTER OFF, 1/7.5, 1/15, 1/30, 1/60, 1/100, 1/250. 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (STEP), V.SCAN 1/60.1 to
1/2084.6 (VARIABLE), EEI (in ALC mode)
WHITE BAL A, B, PRESET, FAW
IRIS LEVEL BACK L, NORMAL, SPOT L
FILTER 3200K, 5600K+1/8ND, 5600K, 5600K+1/64ND
ZEBRA 70-80%, 85-95%, OVER95%, OVER100%
REMAIN Remaining tape time (min) or tape type (Example: 95 min ( ))
(when using MiniDV cassette), (when using standard cassette), DVCAM (when using DVCAM cassette)
* DVCAM indicates IC Memory compatible DVCAM cassette.
In the case of other DVCAM cassette than IC Memory compatible cassette, or is indicated.
AUDIO Audio sampling frequency and audio level adjustment method (Example) 32K (CH1 Å CH2˜ ) Å (Auto)
˜ (Manual)
No. Item Contents
F VTR mode indication STBY : In record standby mode (record-pause mode)
REC : During recording
ED.FWD : Edit search in forward direction
ED.REV : Edit search in reverse direction
PLAY : During playback
FF : During fast forward
REW : During rewind
STL : During still picture playback mode
BSRH : During blank search
FWD : During playback in forward direction (FWD1: About ×5 speed,
FWD2: About ×9 speed, FWD3: About ×20 speed)
REV : During playback in reverse direction (REV1: About ×5 speed,
REV2: About ×9 speed, REV3: About ×20 speed)
STOP : Stop mode (Tape protect mode)
EJECT : Cassette being ejected
– – – : No tape loaded
G Iris indicator display ▲: Iris set higher than normal
■ : Iris set to normal
▼: Iris set lower than normal
H Iris F-value indication Indicates the F-number of the connected lens.
OPEN, F2, F2.8, F4, F5.6, F8, F11, F16, CLOSE
It is not displayed when the lens is removed. For some lenses, no display
appears.
The indication can be switched ON/OFF with the F.NO/IRIS IND. item on
the LCD/VF (1/2) menu screen.
I Filter position indication Indicates the current filter position
FIL1, FIL2, FIL3, FIL4
The indication can be switched ON/OFF with the FILTER item on the LCD/
VF (1/2) menu screen.
2-6 Indications on the LCD Monitor and in the Viewfinder (Cont’d)
25
2. CONTROLS, INDICATORS AND CONNECTORS
No. Item Contents
1
Indication of Time Code (TC)/User’s Bits (UB)
In the playback mode, the recorded time code (hour, minute, second, frame)
is displayed. Whether or not to display this item is set with the TC/UB item
on the LCD/VF (2/2) menu screen. Whether to show the time code or the
user’s bits is selected with the COUNTER switch inside the side cover.
2 Remaining tape time Remaining tape indication (displayed in 1-minute steps)
This indicator blinks when remaining tape time is equivalent to less than 3
minutes.
Whether or not to display this item is set with the TAPE REMAIN item on
the LCD/VF (2/2) menu screen.
* When inserting a brand-new tape, the remaining tape time is not indicated.
When the tape has been run, the indication will appear.
* The remaining tape indication is to be used only as a guide.
* When the unit is used at low temperatures, it may take a while before the
indication of the remaining tape time appears.
3 Indication of the DV Disk Recorder status Displayed when the optional DV Disk Recorder is connected.
: Displayed (white) when the DV Disk Recorder is connected.
● : Displayed (red) when the DV Disk Recorder is recording.
4 Voltage indication (Example) 12.2 V : Indicates battery voltage in 0.1 V steps.
or (Example)
100%: Remaining battery is shown in percentage [%].
Battery indication (Example) 60min: Remaining battery is shown in minutes [min].
Select the display method with the BATTERY INFO item on the LCD/VF
(2/2) menu. ☞ See page 82
5 Time/Date indication Recorded data are displayed during playback, fast forward, and rewind.
(Only when the DATE REC item is set to OFF (☞ See page 85))
During recording, the data from the DV connector is displayed.
In the stop mode, the current data is displayed.
Whether or not the date and time should be displayed and the display style
are set on the TIME/DATE menu screen.
When the date and time have not been set, the following indication appears.
– – / – – / – – – – : – – : – –
6 Audio sampling frequency indication The audio sampling frequency used for the recording is displayed during
playback.
(32 K, 48 K, 44.1 K)
7 Audio level meter indication Displays the audio level meters during playback.
Whether or not to display this item is set with the AUDIO item on the LCD/
VF (2/2) menu screen.
8 VTR mode indication Indicates the VTR operation status.
STBY, STOP, PLAY, REC, FF, REW, FWD, REV, STL, BSRH, – – – (No
tape loaded), SLOW: During variable playback in forward direction
(SLOW+1: About ×0.1 speed, SLOW+2: About ×0.2
speed, SLOW+3: About ×0.5 speed)
During variable playback in reverse direction
(SLOW–1: About ×–0.1 speed, SLOW–2: About
×–0.2 speed, SLOW–3: About ×–0.5 speed)
9 Event display BLANK SEARCH : Indicates that blank search operation is in progress.
■Status Screen in VTR MODE (DV Signal Input Mode)
Event display area
00:00:00:00
20
min
48
k
12
.2V
PLAY 01/02/03
AM
01:23:45
DD
1
2
6
4
57
8
9
3