Filter
Top Products
84
11. MENU SCREENS
The HEADER REC menu screen is used for settings related to the HEADER REC function. (☞ page 58)
11-12 HEADER REC Menu Screen
START KEY
TC DATA
UB DATA
BARS TIME
BLACK TIME
PAGE BACK
STOP+VTR
DISABLE
EXECUTE
ZERO
PRESET
CANCEL
EXECUTE
ZERO
PRESET
CANCEL
0 SEC
to
99 SEC
0 SEC
to
99 SEC
–––––
Sets whether the HEADER REC operation should be executed when
the VTR trigger button is pressed while the STOP button is pressed.
STOP+VTR : HEADER REC operation is executed.
DISABLE : HEADER REC operation is not executed.
Sets the time code value for the point when the Record-Standby mode
is engaged following completion of HEADER REC.
EXECUTE : Confirms the set time code.
ZERO PRESET: Resets all time codes to zero (0).
CANCEL : Clears the set time code.
The Frame mode will in accordance with the setting of the DROP/NON
DROP item on the TC/UB/CLOCK menu screen.
* The time code value at the point when the Record-Standby mode is
engaged may differ some frames from the value set for this item.
Sets the user’s bits of the HEADER REC section.
EXECUTE : Confirms the set user’s bits.
ZERO PRESET: Resets all user’s bits data to zero (0).
CANCEL : Clears the set user’s bits.
Sets the duration (seconds) in which the color bar signal and test tone
(1 kHz) is recorded during HEADER REC. (1-sec steps)
Sets the duration (seconds) in which the black signal is recorded during
HEADER REC. (1-sec steps)
The TC/UB/CLOCK menu screen returns when the SHUTTER dial is
pressed.
DISABLE
EXECUTE
EXECUTE
30 SEC
30 SEC
–––––
Item Function Variation Range Initial Setting
MEMO:
The user’s bits for the normal recording section are set on the TC/
UB/CLOCK menu screen.
85
11. MENU SCREENS
11-13 TIME/DATE Menu Screen
Item Function Variation Range Initial Setting
DISPLAY
DISPLAY
MODE
DATE REC
DISPLAY
STYLE
DATE STYLE
TIME STYLE
SEC DISPLAY
CLOCK
ADJUST
PAGE BACK
OFF
ON
BARS+CAM
BARS
CAM
OFF
BARS
BARS+CAM
DATE+TIME
DATE
TIME
YY/MM/DD
MM/DD/YY
DD/MM/YY
24 HOUR
12 HOUR
OFF
ON
–––––
–––––
OFF
BARS+CAM
OFF
DATE+TIME
MM/DD/YY
24 HOUR
ON
–––––
–––––
Sets whether the date and time are shown in the status display on the
LCD monitor or in the viewfinder.
OFF: Not displayed.
ON :Displayed.
● When a tape with time and date not recorded is played back, there will
be no display of time and date even when this item is set to ON.
● To display the date and time recorded on the tape, set the DATE REC
item to OFF. When the DATE REC item is set to BARS or BARS+CAM,
the date and time recorded on the tape are not displayed even if this
item is set to ON.
In the Camera mode, the date and time are displayed in accordance with
the following settings. In the VTR mode, if the DATE REC item is set to
OFF, the date and time recorded on a tape are displayed in accordance
with the following settings.
BARS+CAM: Date and time are always displayed.
BARS : Date and time are displayed when the OUTPUT switch on
the side section is set to BARS.
CAM :Date and time are displayed when the OUTPUT switch on
the side section is set to CAM.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item
cannot be selected.
Selects whether date and time are to be recorded on the tape as video
data or not, as well as the video mode in case of recording.
Recording is done according to the set position of the OUTPUT switch at
the side panel.
OFF : Date and time data are not recorded.
BARS: Date and time data are recorded when color bars are output.
BARS+CAM: Date and time data are recorded when color bars and camera
image are output.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item
cannot be selected.
With setting to BARS or BARS+CAM, the screen size is fixed to 4:3.
Selects the style for the date and time display.
DATE+TIME: Date and time are displayed.
DATE: Date only is displayed.
TIME : Time only is displayed.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item
cannot be selected.
Selects the style for the date display.
YY/MM/DD: Displayed in the format of year/month/date.
MM/DD/YY: Displayed in the format of month/date/year.
DD/MM/YY: Displayed in the format of date/month/year.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item
cannot be selected.
Selects the style for the time display.
24 HOUR: Displays the time using the 24-hour system.
12 HOUR: Displays the time using the 12-hour system.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item
cannot be selected.
Selects whether to display the seconds in the time display.
OFF:Seconds are not displayed.
ON :Seconds are displayed.
When the DISPLAY item is set to OFF, “- - -” is indicated and this item
cannot be selected.
To adjust the date and time, align the cursor with this position and then
press the SHUTTER dial.
The date and time are set on the CLOCK ADJUST screen. For the setting
method, see “Setting, Displaying and Recording the Date and Time” on
page 43.
The TC/UB/CLOCK menu returns when the SHUTTER dial is pressed
while the cursor is at this position.