Filter
Top Products
77
11. MENU SCREENS
SKIN DTL
DETECT
V.RESOLUTION
WHITE CLIP
KNEE
POINT
ADVANCED
PROCESS
PAGE BACK
OFF
NORMAL
108%
100%
–––––
–––––
Item Function Variation Range Initial Setting
Sets the Skin Detail function to ON or OFF.
ON : Skin Detail function activated.
OFF: Skin Detail function not activated.
☞ See “Using the Skin Detail Function” on page 95.
Increases the vertical resolution.
● NORMAL : Vertical resolution of approx. 380 lines.
● V.MAX : Vertical resolution of approx. 450 lines.
Sets the point where white clipping is to take place for an input video
signal with a high luminance level.
108% : The luminance level is white-clipped at the point of 108%.
100% : The luminance level is white-clipped at the point of 100%. If the
screen appears too white even with the point set at 108%, set the
point at 100%.
Sets the knee point (brightness level) when the AUTO KNEE function is
set to OFF.
Displays the ADVANCED PROCESS Screen.
☞ See “ADVANCED PROCESS Screen” on page 78.
The TOP MENU returns when the SHUTTER dial is pressed with the
cursor at this position.
ON
OFF
NORMAL
V.MAX
108%
100%
100%
95%
90%
85%
80%
–––––
–––––
Note:
In the case of “V.MAX”, colours may be found on the brighter portions
of the object depending on its color temperature.
78
11. MENU SCREENS
Item Function Variation Range Initial Setting
OFF
ON
OFF
STANDARD
WARM
EXTRA1
EXTRA2
EXTRA3
MAX (5)
4
to
NORMAL (0)
to
–4
MIN (–5)
OFF
MAX (10)
9
to
NORMAL
to
–9
MIN (–10)
OFF
STANDARD
NORMAL
NORMAL
11-7 ADVANCED PROCESS Screen
When set to ON, produces gamma curve close to the picture characteristics
of movies.
Used to set the color matrix. When set to ON, color reproduction becomes
good. However, noise will increase.
5 types of color matrix functions are provided.
OFF : The function is OFF
STANDARD : Standard colour matrix
WARM : Colour adjustment with red tinge
EXTRA 1 to 3 : To set a color matrix other that those described above.
Select the desired option.
Compensates for the gamma curve that determines the reproducibility of
black color.
● To enhance the black color reproducibility. However, halftones will be
lost for white section
...............Increase the number
● When reproducibility of the black color is not so important
...............Decrease the number
For correcting the entire black level when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To raise the entire black level...Increase the number
To lessen the entire black level...Decrease the number
For correcting the black level of Rch when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To weaken tinge of red ... Increase the number
To strengthen tinge of red ... Decrease the number
For correcting the black level of Bch when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To weaken tinge of blue ... Increase the number
To strengthen tinge of blue ... Decrease the number
Pressing the SHUTTER dial once when the cursor is at this position
switches the screen to display the SKIN COLOR ADJUST screen.
The CAMERA PROCESS menu screen returns when the SHUTTER dial
is pressed with the cursor at this position.
Note:
When CINE MODE is ON, “FIX” is displayed and setting is not possible.
Note:
When CINE MODE is ON, “FIX” is displayed and setting is not possible.
Note:
When LOLUX is ON, “FIX” is displayed and setting is not possible.
Note:
When LOLUX is ON, “FIX” is displayed and setting is not possible.
Note:
When LOLUX is ON, “FIX” is displayed and setting is not possible.
CINE MODE
COLOR
MATRIX
GAMMA
FLARE
<MASTER>
FLARE <R>
FLARE <B>
SKIN COLOR
ADJUST
PAGE BACK