Filter
Top Products
59
7. SHOOTING OPERATION
––– HEADER REC –––
START KEY STOP+VTR
EXECUTE
UB DATA 00 00 00 00
EXECUTE
BARS TIME 30SEC
BLACK TIME 30SEC
TC DATA 00:00:00:00
PAGE BACK
HEADER REC
■How to set the HEADER REC menu screen
1.
Display the HEADER REC menu screen.
Press the STATUS button for 1 second or longer to display
the TOP MENU screen. Use the SHUTTER dial to select
TC/UB/CLOCK menu → HEADER REC menu, and then
press the SHUTTER dial.
2.
Setting the HEADER REC menu screen.
1Select the menu item.
Rotate the SHUTTER dial to align the cursor ( ) with
the item to be set, and then press the SHUTTER dial.
● The setting area of the selected item starts blinking.
2 Changing the setting value.
Rotate the SHUTTER dial to change the setting, and
then press the SHUTTER dial.
■In the case of the TC DATA item and the UB DATA item,
the blinking digit position moves when the SHUTTER dial
is pressed. When the SHUTTER dial is rotated, the value
of the blinking digit changes. After all the digits have been
set and the SHUTTER dial is pressed, EXECUTE starts
blinking. Press the SHUTTER dial once more to confirm
the set value.
3.
To terminate the setting, press the STATUS button.
Executing the HEADER REC Function
■The START KEY item on the HEADER REC menu screen
should be set to STOP+VTR.
1.
Set the MODE switch to CAM mode.
Load the cassette and engage the Record-Standby mode
or the Stop mode.
2.
While pressing the STOP button, press the VTR trigger
button.
● The tape automatically rewinds to the beginning, and
HEADER REC operation starts from the beginning of the
tape.
After HEADER REC recording is performed for the
specified duration only, the Record-Standby mode is
engaged automatically.
● During HEADER REC recording, “HEADER REC” is
shown (blinking) on the LCD monitor and in the viewfinder.
3.
After HEADER REC recording is completed and the Record-
Standby mode is engaged, normal recording starts when
you press the VTR trigger button.
● When the TC GENE switch is set to either PRESET REC
or REGEN, the time code value at the start of the
recording will be the time code value set on the HEADER
REC menu screen.
HEADER REC menu screen
Cursor Item Set value
During HEADER REC
● The time code preset on the TC/UB/CLOCK menu screen
becomes invalid when HEADER REC recording is
performed.
● The user’s bits following completion of HEADER REC
recording will be the user’s bits value set on the TC/UB/
CLOCK menu screen.
● The running of the time code following completion of
HEADER REC recording will be in accordance with the
setting of the TC GENE switch.
FREE RUN : Continuous running.
REC RUN or REGEN: Runs only during REC.
MEMO:
● The HEADER REC menu screen cannot be opened during
HEADER REC recording.
● HEADER REC operation is accepted even during loading
of the cassette tape.
● The date and time recorded in the color bar section will be
in accordance with the settings for the DATE REC item on
the TIME/DATE menu screen.
● Date and time data are not written during recording of black
video signals.
● The test tone (1 kHz sine-wave) recorded in the color bar
section will be recorded unrelated to the setting for the
TEST TONE item on the AUDIO/VIDEO menu screen.
MEMO:
To stop during HEADER REC operation, press the VTR
trigger button or the Stop button.