Filter
Top Products
81
11. MENU SCREENS
11-10 LCD/VF Menu Screen
The LCD/VF menu screen consists of two screens. (1/2 screen, 2/2 screen)
■LCD/VF (1/2) Menu Screen
Settings can be made on the LCD/VF (1/2) menu screen only in the Camera mode.
Item Function Variation Range Initial Setting
ZEBRA
F.NO/
IRIS IND.
FILTER
SAFETY
ZONE
CENTER
MARK
NEXT PAGE
PAGE BACK
Switches the luminance level of the subject sections where the zebra
pattern is displayed.
70-80% : Zebra pattern is displayed in sections with luminance
levels between 70% and 80%.
85-95% : Zebra pattern is displayed in sections with luminance
levels between 85% and 95%.
OVER 95% : Zebra pattern is displayed in sections with luminance
levels over 95%.
OVER 100% : Zebra pattern is displayed in sections with luminance
levels over 100%.
Selects whether or not the F-number of the lens iris/iris level mark is
displayed in the status display on the LCD monitor or in the viewfinder.
(Status 1 screen)
OFF : F-number and iris level mark is not displayed.
F.NO : F-number is displayed.
F.NO+IND.: F-number and iris level mark is displayed.
Selects whether or not the FILTER position of the unit is displayed in the
status display on the LCD monitor or in the viewfinder. (Status 1 screen)
OFF : FILTER position is not displayed.
ON : FILTER position is displayed.
Selects whether or not the safety zone is shown on the LCD monitor or in
the viewfinder together with the form of the safety zone indication.
OFF : Not displayed
NORMAL : 4:3 zone is displayed.
16:9 : 16:9 zone is displayed.
Sets whether or not a center mark is displayed when the safty zone is
displayed.
ON : Center mark is displayed.
OFF : Center mark is not displayed.
To display the LCD/VF (2/2) menu screen, align the cursor with this item
and then press the SHUTTER dial.
The TOP MENU screen returns when the SHUTTER dial is pressed while
the cursor is at this position.
70-80%
85-95%
OVER 95%
OVER 100%
OFF
F.NO
F.NO+IND.
OFF
ON
OFF
NORMAL
16:9
ON
OFF
–––––
–––––
70-80%
OFF
OFF
OFF
ON
–––––
–––––
CAUTION:
When the SAFETY ZONE item is set to OFF, “- - -” is indicated and
this item cannot be selected.
82
11. MENU SCREENS
Selects whether the remaining battery level should be shown in minutes
[min], percentage [%] or voltage [V] in the LCD monitor or viewfinder.
VOLTAGE: Indicates battery voltage in 0.1 V steps.
TIME : Remaining battery is shown in minutes [min].
CAPA% : Remaining battery is shown in percentage [%].
changes as shown below according to the remaining battery level.
: 50% or more : 10% to less than 50% : 10% or less
Selects whether or not the remaining tape time (minutes) is shown in the
status display on the LCD monitor or in the viewfinder.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
Selects whether or not the time code or user’s bits data should be shown
in the status display on the LCD monitor or in the viewfinder.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
* Whether the time code or user’s bits data is shown is selected with the
COUNTER switch.
Selects whether the audio level meters should be shown in the status
display on the LCD screen and the viewfinder screen.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
Adjusts the color saturation of the LCD monitor.
Adjusts the contour of the LCD monitor.
To return to the LCD/VF (1/2) menu screen, align the cursor with this
position and then press the SHUTTER dial.
11-10 LCD/VF Menu Screen (Cont’d)
■LCD/VF (2/2) Menu Screen
VOLTAGE
TIME
CAPA%
OFF
ON
OFF
ON
OFF
ON
MAX (5)
4
to
NORMAL
to
–4
MIN (–5)
MAX (5)
4
to
NORMAL
to
–4
MIN (–5)
–––––
VOLTAGE
ON
OFF
OFF
NORMAL
NORMAL
–––––
Item Function Variation Range Initial Setting
MEMO:
BATTERY
INFO
TAPE
REMAIN
TC/UB
AUDIO
LCD COLOR
LCD
PEAKING
PAGE BACK
● When remaining battery level is set to TIME or CAPA%, “ RES”
is shown when battery level becomes less than 10%.
● Remaining battery levels in [min] and [%] can be selected when
an Anton-Bauer Battery Holder (QR JVC DIGI) is attached.
Remaining battery level is shown automatically in [V] when using
other battery holders.
● When remaining battery level is set to TIME or CAPA% and
information from the battery is not correct (calibration required),
the display switches between voltage [V] and “
CAL” every 2
seconds.