JVC LYT2473-002A Camcorder User Manual


 
Reducing Camera Shake
When the image stabilizer is set, camera shake during video recording can
be effectively reduced.
1
Open the LCD monitor.
.
2
Press the a
button to change the setting.
.
0
The setting of image stabilizer changes with every press.
Setting Details
b
OFF
Deactivates image stabilizer.
a
ON
Reduces camera shake under normal shooting
conditions.
r ON (AIS)
(A video mode only)
Reduces camera shake more effectively when
shooting bright scenes on the wide angle end.
Only on the wide angle end (approx. 5x).
s
(Enhanced AIS)
(A video mode only)
The area of correction in the enhanced AIS
mode is greater than that in the AIS mode.
Camera shake can be reduced more
effectively even when recording is performed
by zooming from wide angle to telephoto, or
moving together with the subject.
Memo :
0
It is recommended to set the image stabilizer to “OFF” when shooting a
subject of little movement with the unit on a tripod.
0
Complete stabilization may not be possible if camera shake is excessive.
0
When “ON (AIS)” is set, the angle of view becomes narrower. In the
enhanced AIS mode, the angle of view becomes even narrower than “ON
(AIS)”.
0
Dynamic zoom is not available in the enhanced AIS mode.
0
Image stabilization only starts when the SNAPSHOT button is pressed
halfway during still image recording.
Slow-motion (High-speed) Recording
You
can record videos in slow-motion by increasing the recording speed to
emphasize the movements, and play back the slow-motion video smoothly.
This is a handy function for checking movements, such as golf swings.
Recording Speed 300 fps
Image Size 720×480
Maximum Recording Time 144 m
Maximum Playback Time 12 h
Image Size when Connected to Monitor 1920×1080
0
The playback time will be 5 times of the actual recorded time.
(Example: If the recorded time is 1 minute, the playback time will be 5
minutes.)
1
Open the LCD monitor.
.
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video. (You can also use the A/B button
on this unit.)
2
Tap “MENU”.
.
REC
PLAY
MENU
0
The shortcut menu appears.
3
Tap “MENU” in the shortcut menu.
.
MENU
4
Tap “HIGH SPEED RECORDING”.
.
VIDEO
HIGH SPEED RECORDING
5
Tap “ON”.
Recording
110