JVC LYT2473-002A Camcorder User Manual


 
Warning
0
Do not point the AF assist beam of the flash at the eyes within a close
range (several cm).
0
Do not look into the flash light directly.
0
Incorrect usage of the flash may cause vision problems.
0
Keep a distance of at least 1 m when shooting young children.
0
Using the flash at drivers may cause temporary blindness and result in
accidents.
Caution :
0
Do not fire the AF assist beam of the flash at the subjects within a close
range (several cm).
0
Do not touch it directly with your hand.
0
If foreign particles, such as dust, are attached, do not use it.
0
Also, do not cover it with tape, etc.
0
Incorrect usage may result in burns.
0
Heat from the flash may result in emission of smoke.
0
Do not touch the flash immediately after it is used.
SELF-TIMER
Use this when taking a group photo.
Operating Details
“Taking Group Shots (Self-timer)” (A p. 114
)
GAIN
Enables selection of the ISO level.
Setting Details
AUTO Adjusts the ISO level automatically according to the brightness
of the subject.
ISO100
ISO200
ISO400
ISO800
ISO1600
ISO3200
ISO6400
Records with a fixed ISO level.
Memo :
0
The flash cannot be used when “ISO6400” is set.
0
The higher the ISO level, the grainier the image becomes due to noise.
Displaying the Item
1
Select still image mode.
.
0
Check if the recording mode is B.
2
Tap “MENU”.
.
MENU
MENU
PLAY
0
The shortcut menu appears.
3
Tap “MENU” in the shortcut menu.
.
MENU
4
Tap “GAIN”.
.
GAIN
IMAGE
Menu Settings
187