JVC LYT2473-002A Camcorder User Manual


 
Importing Files from the USB External Hard Disk Drive
You can copy video files from a USB external hard disk drive to the SD card
of this unit.
1
Select video mode.
2
Tap “IMPORT FROM DEVICE” in “BACK-UP”.
.
IMPORT FROM DEVICE
VIDEO BACKUP
0
Tap A to
switch between the video (60i), video (60p), and still image
modes. Switch to the mode in which you want to import files.
3
Tap on the folder to import.
.
SELECT FOLDER
USB HDD→SD
4
Tap on the files to import.
.
REL ALLSEL ALL
USB HDD→SD
0
P appears on the selected files.
To remove P from a file, tap on the file again.
0
Tap “SEL ALL” to select all files.
0
Tap “REL ALL” to release all selections.
5
Tap “SET”.
.
SETREL ALLSEL ALL
USB HDD→SD
0
“SET” is deactivated when no file is selected.
6
Tap “YES”.
.
NOYES
START COPY?
COPY QUANTITY:30
COPY ALL
0
Importing starts when “YES” is tapped.
0
To cancel importing of files, tap “STOP”, then tap “YES”.
7
After importing, tap “OK”.
.
OK
COPYING COMPLETED
COPY ALL
8
Press and hold the M button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution :
0
In
accordance to the imported video, settings for the “SYSTEM SELECT”
is changed to video mode (60i or 60p) automatically, after the video is
imported. Change the settings as necessary.
“ SYSTEM SELECT ” (A p. 179)
Memo :
0
Files
that are saved to the USB external hard disk drive from other devices
cannot be copied to this unit.
Copying
159