Filter
Top Products
5
Tap “OK” when “COMPLETED” is displayed.
.
OK
SAVED
ALL SCENES
6
Press and hold the M button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution :
0
Do not turn off the power or remove the USB cable until copying is
complete.
0
Files that are not on the index screen during playback cannot be copied.
Special files cannot be copied either.
0
If the desired video or still image is not copied, switch the mode to video
(60i), video (60p), or still image accordingly in step 2.
0
Copying may take time. (For example, saving 1 hour video in XP mode
takes about 20 minutes.)
0
In case the videos are saved, upon completion of saving, the setting for
the “SYSTEM SELECT” is automatically changed to the video mode
(either 60i or 60p) that is saved. Change the settings as necessary.
“SYSTEM SELECT” (A p. 179)
Playing Back Files in the USB External Hard Disk Drive
Videos or still images saved in an external hard disk drive can be played
back on this unit.
1
Tap “PLAYBACK”.
.
PLAYBACK
VIDEO BACKUP
2
Select video (60i or 60p), or still image mode.
.
60p
60p
0
If step 2 is not displayed, go to step 3.
0
If the backup files of video (60i or 60p), or still image are not made,
these icons won’t be displayed.
3
Tap on the folder to play back.
.
PLAYBACK
0
Tap “J” to return to the “BACK-UP” menu.
4
Tap on the file to play back.
.
PLAYBACK
0
Tap “J” to return to the folder index screen.
0
For details on video playback, refer to ““Operation Buttons for Video
Playback” (A p. 119) ”.
“Operation Buttons for Video Playback” (A p. 119)
0
To exit, stop playback and turn off the camcorder by pressing the M
button for about 2 seconds. Then, disconnect the USB cable.
Caution :
0
In
case the videos are played back, upon completion of the playback, the
setting for the “SYSTEM SELECT” is automatically changed to the video
mode (either 60i or 60p) that is played. Change the settings as necessary.
“SYSTEM SELECT” (A p. 179)
Memo :
0
Sound or video may be interrupted during playback.
Copying
157