Kodak 4F3882 Camera Accessories User Manual


 
78 KODAK Display Manager System V4.1 User’s Guide
Troubleshooting
Dark Gain Correction Failure
Dark Gain Correction may fail if light enters the sensor. The following
message is displayed.
1. Click OK on this message and also on the initialization message that
appears next.
2. Restart the process that you were running when you were prompted to
perform the Dark Gain Correction - either Calibrate, Characterize or Verify.
3. When prompted for the Dark Gain Correction, place the sensor on a dark
surface where light cannot reach it.
Do not attach it to the monitor.
Cover it with a dark cloth, if necessary.
4. Repeat the Dark Gain Correction.
5. If the previous steps failed to fix the problem, contact KODAK Service and
Support (email address: tac@ei.kodak.com).
NOTE
Some hardware configurations may not be supported.