Filter
Top Products
28 KODAK Display Manager System V4.1 User’s Guide
Before Calibrating
Use Video Calibration Settings
• Select this checkbox to determine which target values to use for
calibration.
NOTE
If using the KODAK VISION2 HD System, use the default values when working
with typical NTSC HD displays.
Sensor Setup
From the Sensor tab on the Setup window, use the drop-down menus to
select the type of sensor and the type of connection
.
IMPORTANT
If you do not select the correct sensor and connection, the sensor will fail to
initialize.
Tolerances Setup
From the Tolerances tab on the Setup window, you can set the plus or minus
calibration tolerances that you want to allow for your aim values. We
recommend using the default settings.
Display Setup
If your system is configured for dual-head support, you must select the display
that you want to view images on.
From the Display tab on the Setup window, use the Display to Operate On
drop-down menu to select the display where you want to view the images.
This display will be calibrated and characterized
.