Filter
Top Products
KODAK Display Manager System V4.1 User’s Guide 5
Introduction
Main Window
The main window contains a selection box for the Display Mode and an icon
for each step in the process.
From the Options menu, select Setup to set the parameters and configure
the system. See
“Setting the Options” on page 24.
From the File menu, load your settings, save your settings or reset to the
factory default settings. See
“Saving and Loading Settings” on page 30.
Calibrate: Opens the Calibration window
where you attach a sensor to measure the
luminance and chromaticity of a series of
color patches.
Characterize: Opens the Characterization
window where you attach a sensor to
measure the luminance and chromaticity of
a series of color patches. Choose Manual
Characterization Assistant to
characterize alternate display devices, such
as HD/SD displays and digital projectors.
Exit: Closes the application.
Viewer: Opens the Viewer where you load
and view images, customize looks, and
build and export LUTs.
Display Mode: Select Auto if you will be
using the enable cable to calibrate. If not,
it is important that you select Manual.
Verify: Opens the Verification window
where you attach a sensor and verify the
quality of the monitor setup and the print
simulation.