Filter
Top Products
119
VQT2G44
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P28.
Type of optical measurement to measure brightness can be changed.
Applicable modes:
Note
• When the AF mode is set to [š] while [C] is selected, exposure is adjusted to the face of a
person, and when it is set to [ ], exposure is adjusted to the locked subject.
For details on [REC] mode menu settings, refer to P28.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
• Even when the [SENSITIVITY] is set to [ISO100]/[ISO125], [SENSITIVITY] may be set higher
than [ISO100]/[ISO125] if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
• [LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
For details on [REC] mode menu settings, refer to P28.
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
Applicable modes:
[OFF]/[ON]
C [METERING MODE]
[C]: Multiple
This is the method in which the camera measures the most
suitable exposure by judging the allocation of brightness on the
whole screen automatically. Usually, we recommend using this
method.
[ ]: Center weighted
This is the method used to focus on the subject on the center
of the screen and measure the whole screen evenly.
[Ù]: Spot
This is the method to measure the subject in the spot metering
target A.
[I.EXPOSURE] (Intelligent exposure adjustment)
[LONG SHTR NR]
DMC-GF1KPP-VQT2G44_eng.book 119 ページ ２００９年８月１７日 月曜日 午後１時１９分