Filter
Top Products
VQT2G44
82
Advanced (Recording pictures)
Press 2/1 to select an item.
• You can also use the rear dial to select.
• When you press [DISPLAY] on the screen shown right,
explanations about each Film Mode are displayed. (When you
press [DISPLAY] again, the screen returns to the previous
screen.)
Press [MENU/SET] to set.
• You can also press the shutter button halfway to set.
Note
• You can also set from the Quick Menu. (P30)
• Use the Quick Menu (P30) to set when in Intelligent Auto Mode.
• In Film Mode, the camera may do something equivalent to pull processing or push processing
to create a picture with particular characteristics. The shutter speed may become very slow at
this time.
Press 2/1 to select a film.
Press 3/4 to select an item and 2/1 to adjust.
• You can also use the rear dial to adjust.
Item Effect
[STANDARD] (COLOR) This is the standard setting.
[DYNAMIC] (COLOR) The saturation and contrast of the stored colors are increased.
[NATURE] (COLOR) Brighter red, green and blue. Enhanced beauty of nature.
[SMOOTH] (COLOR) The contrast is lowered for smoother and clearer color.
[NOSTALGIC] (COLOR) Lower saturation and contrast. Reflecting passage of time.
[VIBRANT] (COLOR) Higher saturation and contrast than dynamic.
[STANDARD] ( ) This is the standard setting.
[DYNAMIC] ( ) The contrast is increased.
[SMOOTH] ( ) Smooths the picture without losing the skin texture.
[MY FILM 1]/[MY FILM 2] The saved setting is used.
[MULTI FILM]
It will take pictures changing the type of film in accordance with
the setting every time the shutter button is pressed. (Up to 3
pictures)
Adjusting each Film Mode to the desired setting
DMC-GF1KPP-VQT2G44_eng.book 82 ページ ２００９年８月１７日 月曜日 午後１時１９分