Filter
Top Products
VQT2G44
128
Advanced (Recording pictures)
• It will display dial operation guide to the screen that is possible to
perform Exposure Compensation, Program Shift, aperture setting, or
shutter speed setting when set to [ON].
A Dial operation guide
• Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots not in subject get recorded, and it is bothering you.
• Turn the camera off and on after the pixels are corrected.
• Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P169)
• You can only select this function when the Optional External Viewfinder (P159) is attached.
• Refer to P55 for details.
[DIAL GUIDE]
Sets if the operation switch guide when the mode dial is switched
to , , and is to be displayed or not.
[OFF]/[ON]
[MENU RESUME]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
[PIXEL REFRESH]
It will perform optimization of imaging device and image
processing.
[SENSOR CLEANING]
Dust reduction to blow off the debris and dust that have affixed to
the rear of the imaging device is performed.
[SHOOT W/O LENS]
It is possible to setup so the shutter will not operate when there is
no lens on the unit.
[OFF]: You cannot press the shutter button when a lens is not
attached to the camera body or is not attached
correctly.
[ON]: Shutter will operate regardless of the lens on the unit.
[LVF DISP.STYLE]
This will set the display style of the optional external viewfinder
(P159)
[]: Viewfinder style
[]: LCD monitor style
A
DMC-GF1KPP-VQT2G44_eng.book 128 ページ ２００９年８月１７日 月曜日 午後１時１９分