Panasonic DMC-GF1C Digital Camera User Manual


 
73
VQT2G44
Advanced (Recording pictures)
AF Tracking will not operate when it has failed to AF track. AF mode will be switched to [Ø] in
that case.
[FACE RECOG.] does not work when AF tracking is active.
In the following cases, [ ] operates as [Ø]
When the film mode is [STANDARD]( ), [DYNAMIC]( ), [SMOOTH]( )
When My Color Mode is [MONOCHROME]
Dynamic tracking function may not work in the following cases:
When the subject is too small
When the recording location is too dark or bright
When the subject is moving too fast
When the background has the same or similar color to the subject
When jitter is occurring
When zoom is operated
AF area can be moved when [Ø] is selected. The size of AF area can also be changed.
You can also set from the Quick Menu. (P30)
Select [Ø] and then press 4.
AF area setting screen is displayed. It will return to previous
screen by pressing [DISPLAY].
Press 3/4/2/1 to move the AF area.
You can set to arbitrary position of the screen. (It cannot be set
to edge of the screen)
The AF area returns to the center when [] is pressed.
Rotate the rear dial to change the size of AF area.
Rear dial right: Enlarge
Rear dial left: Shrink
It can be changed to 4 different sizes of “spot” A, “normal” B,
“large” C, and “extra large” D.
Press [MENU/SET] to set.
Move the AF area easily while taking pictures
When the [DIRECT AF AREA] (P126) in the [CUSTOM MENU] menu is set to [ON] while
[Ø] is selected, it is possible to move the AF area directly with 3/4/2/1.
It is also possible to change the size of AF area by rotating the rear dial in the screen to set
the position.
[SENSITIVITY] (P80), [Fn BUTTON SET] (P31), [AF MODE] (P71), or [WHITE BALANCE]
(P77) cannot be set with 3/4/2/1. Make the setting with the Quick Menu (P30).
Note
The spot metering target can also be moved to match the AF area when using [Ù]. (P119)
Set the size of AF area to “normal”, “large”, or “extra large” when it is hard to focus using the
“spot”.
[DIRECT AF AREA] is fixed to [OFF] in My Color Mode and in all scene modes other than
[PERIPHERAL DEFOCUS].
[DIRECT AF AREA] is disabled during motion picture recording.
Setting the AF area
A
B DC
DMC-GF1KPP-VQT2G44_eng.book 73 ページ 2009年8月17日 月曜日 午後1時19分