Filter
Top Products
83
VQT2G44
Advanced (Recording pictures)
• Registered settings are memorized even if the camera is turned off.
Press 3/4 to select the [MEMORY] and then
press [MENU/SET].
• You can register 2 settings. ([MY FILM 1] and [MY FILM 2])
(After registering, the Film Mode name that was registered
previously is displayed.)
• [STANDARD] is registered in [MY FILM 1] and [MY FILM 2] at
the time of purchase.
Note
•
Noise may become visible when you take pictures in dark places. To avoid picture noise, we recommend
setting [NOISE REDUCTION] towards [
_
] or setting the items except [NOISE REDUCTION] towards [
`
]
to take pictures.
• If you adjust a Film Mode, [_] is displayed beside the Film Mode icon on the LCD monitor/
optional external viewfinder.
• You cannot adjust [SATURATION] in the black and white settings in Film Mode.
• Film Mode cannot be adjusted in the Intelligent Auto Mode and Scene Mode.
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
• You can also set from the Quick Menu. (P30)
Press 2/1 to select [MULTI FILM].
Select either [MULTI FILM 1], [MULTI FILM 2], or
[MULTI FILM 3] with 3/4, and then select the film
to be set for each with 2/1.
• You can also use the rear dial to set.
• [OFF] can be selected only for [MULTI FILM 3].
Press [MENU/SET] to set.
Item Effect
[CONTRAST]
[r]
Increases the difference between the brightness and the
darkness in the picture.
[s]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[r] The picture is sharply defined.
[s] The picture is softly focused.
[SATURATION]
[r] The colors in the picture become vivid.
[s] The colors in the picture become natural.
[NOISE REDUCTION]
[r]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[s]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
Multi Film Bracket
DMC-GF1KPP-VQT2G44_eng.book 83 ページ ２００９年８月１７日 月曜日 午後１時１９分