Filter
Top Products
VQT2G44
34
Preparation
• When you connect the camera to a TV, the volume of the TV speakers does not change.
• The folder number is updated and the file number starts from 0001. (P154)
• A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P36) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the card first and then use this function to reset the
file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
• When the [REC] mode settings are reset, data registered with [FACE RECOG.] will be also
reset, too.
• When [SETUP]/[CUSTOM MENU] menu settings are reset, the following settings are also
reset. In addition, [FAVORITE] (P134) in [PLAYBACK] mode menu is set to [OFF], and
[ROTATE DISP.] (P141) is set to [ON].
– The birthday and name
settings for [BABY1]/[BABY2] (P91) and [PET] (P92) in Scene Mode.
– The settings of [TRAVEL DATE] (P111) (departure date, return date, location)
– The [WORLD TIME] (P113) setting.
• The folder number and the clock setting are not changed.
• When [PC] is selected, the camera is connected via the “USB Mass Storage” communication
system.
} [SCENE MENU]
Set the screen that is displayed when the mode dial is set to .
[OFF]: The recording screen in the currently selected scene
mode appears.
[AUTO]: The scene mode menu screen appears.
[BEEP]
Set the focus confirmation beep, the self-timer beep and the
alarm beep.
[s] (Muted)
[t] (Low)
[u] (High)
u [VOLUME]
Adjust the volume of the speaker to any of 7 levels.
v [NO.RESET]
Reset the file number of the next recording to 0001.
w [RESET]
The [REC] or [SETUP]/[CUSTOM MENU] menu settings are reset
to the initial settings.
x [USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
DMC-GF1KPP-VQT2G44_eng.book 34 ページ ２００９年８月１７日 月曜日 午後１時１９分