Filter
Top Products
33
VQT2G44
Preparation
• If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P65) referring to the histogram (P58) and
then taking the picture again. It may result in a better
quality picture.
• There may be white saturated areas if the distance
between the camera and the subject is too close
when taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area directly illuminated by the photo flash will
become white saturated and appear blinking in black and white.
• The LCD/EVF will display overexposed portions of the image as white blinking areas. These
only exist on the camera’s display, not on the actual photo.
• This does not work while in Multi Playback (P51), Calendar Playback (P52), or Playback Zoom
(P52).
• Adjust the brightness of the screen with 3/4, contrast and saturation
with 2/1 or the rear dial.
• When [DISPLAY] is pressed in screen shown right, it will switch to the
color adjustment screen. Adjust between red and green with 3/4, or
between orange and blue with 2/1 or the rear dial.
Press [MENU/SET] to return to the LCD adjustment screen.
• It will adjust the LCD monitor when the LCD monitor is in use, and the
viewfinder when optional external viewfinder is in use.
• The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
• The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD mode. Press any button to make the LCD monitor bright again.
• If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
• The number of recordable pictures decreases in Auto Power LCD and Power LCD modes.
• [AUTO POWER LCD] cannot be selected when playing back pictures.
• [AUTO POWER LCD] is disabled during motion picture recording.
• When the menu screen is displayed in a dark environment etc., the LCD monitor becomes
darker even if [LCD MODE] is set to [OFF].
[HIGHLIGHT]
When the Auto Review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[OFF]/[ON]
[MONITOR]/
[VIEWFINDER]
Brightness, color, or red or blue tint of the LCD monitor/optional
external viewfinder is adjusted.
[LCD MODE]
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
… [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
[ON] [OFF]
LCD
DMC-GF1KPP-VQT2G44_eng.book 33 ページ ２００９年８月１７日 月曜日 午後１時１９分