Filter
Top Products
43
VQT2G44
Basic
It is possible to set the focus and exposure to the specified subject. Focus and exposure
will keep following the subject automatically even if it moves.
1 Press 2.
• [ ] is displayed in the lower left of the screen.
• AF Tracking frame is displayed in the center of the
screen.
• Press 2 again to cancel.
2 Place the subject in the Tracking frame, and
press the shutter button halfway to lock the subject.
• AF area will turn green when the camera detects the subject.
• AF tracking frame will turn yellow when you release the shutter button and
the optimum scene for the locked subject will be identified.
• Press 2 to cancel.
Note
• [FACE RECOG.] does not work during AF tracking.
• Please read the Note regarding the AF tracking on P72.
• Only the following functions can be set in this mode.
[REC] mode menu
– [ASPECT RATIO] (P115)/[PICTURE SIZE] (P115)/
[QUALITY] (P116)/[FACE RECOG.]
(P117)/
[STABILIZER]
¢1
(Only available when a lens that supports the Stabilizer function is
attached)
(P117)
¢1Only [MODE1] or [MODE2] can be set.
[MOTION PICTURE] mode menu
– [REC MODE] (P100)/[REC QUALITY]
¢2
(P100)/[CONTINUOUS AF] (P103)/[WIND CUT]
(P103)
¢2[ ] for [MOTION JPEG] cannot be set.
[CUSTOM MENU] menu
– [CUST. SET MEM.] (P95)/[GUIDE LINE] (P124)/[REMAINING DISP.] (P127)
[SETUP] menu
– [CLOCK SET]/[WORLD TIME]/[BEEP]/[LANGUAGE]
• Use the Quick Menu (P30) to set the following functions:
– [STANDARD] and [STANDARD] ( ) in [FILM MODE] (P81)
– [ ] and [ ] in [SELF-TIMER] (P70)
• In recording still pictures,
the settings of the following items are fixed.
AF Tracking Function
Settings in Intelligent auto mode
Item Settings
[ECONOMY]
([POWER SAVE]) (P32)
[5MIN.]
Flash (P59) ‡/Œ
[FLASH SYNCHRO] (P64) [1ST]
[BURST RATE] (P66) [H] (High speed)
[AUTO BRACKET] (P68) [STEP]
: [3•1/3]
[SEQUENCE]: [0/`/_]
DMC-GF1KPP-VQT2G44_eng.book 43 ページ ２００９年８月１７日 月曜日 午後１時１９分