Filter
Top Products
53
VQT2G44
Basic
∫ Switching the displayed image while maintaining the Playback Zoom
You can switch the displayed image while maintaining the same zoom magnification and
zoom position for the Playback Zoom.
Switch to picture select operation by pressing
the rear dial during Playback Zoom, and select
pictures with 2/1.
• It will switch between picture select operation and move
zoom position operation every time the rear dial is pressed
during Playback Zoom.
Note
• You can also delete the recording information etc. on the LCD monitor/optional external
viewfinder during Playback Zoom by pressing [DISPLAY].
• If you want to save the enlarged picture, use the trimming function. (P139)
• The Playback Zoom may not operate if pictures have been recorded with other equipment.
• The zoom magnification and the zoom position are canceled when the camera is turned off
(including power save mode).
• The zoom position returns to the center in the following images.
– Images with different aspect ratios
– Images with different numbers of recorded pixels
– Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])
• Playback Zoom cannot be used during motion picture playback or pictures with audio playback.
Deleting Pictures
Once deleted, pictures cannot be recovered.
Press [(].
To delete a single picture
Select the picture to be deleted, and then
press [‚].
A [(] button
B [DISPLAY] button
C [
‚] button
Press 2 to select [YES] and then press
[MENU/SET].
MENU
/SET
DMC-GF1KPP-VQT2G44_eng.book 53 ページ ２００９年８月１７日 月曜日 午後１時１９分