Filter
Top Products
VQT2G44
120
Advanced (Recording pictures)
Note
• If you set [ON], the countdown screen is displayed when the shutter button is pressed. Do not
move the camera at this time. After the countdown is finished, [PLEASE WAIT...] is displayed
for the same time as the selected shutter speed for signal processing.
• We recommend using a tripod when the shutter speed is slowed to take pictures.
• This does not operate during motion picture recording.
For details on [REC] mode menu settings, refer to P28.
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Applicable modes:
[OFF]/[200]/[400]/[800]/[1600]
Note
• The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
• It will work when the [SENSITIVITY] is set to [AUTO] or [ ].
For details on [REC] mode menu settings, refer to P28.
ISO sensitivity settings between [ISO100] and [ISO3200] are changed for every 1/3 EV.
Applicable modes:
Note
• When the setting is changed from [1/3 EV] to [1 EV], ISO sensitivity will be set to value closest
to the value set during the [1/3 EV]. (Set value will not restore when the setting is changed back
to [1/3 EV]. It will stay as the setting selected for [1 EV].)
For details on [REC] mode menu settings, refer to P28.
Enlarging a picture with no picture quality deterioration
Applicable modes:
[OFF]/[ON]
Note
• Refer to P49 for details.
For details on [REC] mode menu settings, refer to P28.
This can enlarge subjects even more than the Optical Zoom or Extended Optical Zoom.
[ISO LIMIT SET]
[ISO INCREMENTS]
[1/3 EV]: [100]/[125]/[160]/[200]/[250]/[320]/[400]/[500]/[640]/[800]/[1000]/[1250]/
[1600]/[2000]/[2500]/[3200]
[1 EV]: [100]/[200]/[400]/[800]/[1600]/[3200]
[EX. OPT. ZOOM]
) [DIGITAL ZOOM]
DMC-GF1KPP-VQT2G44_eng.book 120 ページ ２００９年８月１７日 月曜日 午後１時１９分