Filter
Top Products
163
VQT2G44
Others
• Refer to the instructions for each filter for details.
• MC
u“Multi-coated”
ND
u“Neutral Density”
• It is recommended to use the MC protector (DMW-LMC46; optional), the ND filter
(DMW-LND46; optional), or the PL filter (DMW-LPL46; optional) with the 20 mm/F1.7 lens
included in DMC-GF1C.
• It is recommended to use the MC protector (DMW-LMC52; optional), the ND filter
(DMW-LND52; optional), or the PL filter (DMW-LPL52; optional) with the 14-45 mm/F3.5-5.6
lens included in DMC-GF1K.
• If you have difficulty attaching or removing the PL filter (DMW-LPL46; optional) on the 20 mm/
F1.7 interchangeable lens included in the DMC-GF1C, we recommend that you attach or
remove the filter with the camera power turned on and the Focus Mode set to [MF].
• Accessories other than filters, such as conversion lenses, cannot be mounted. It may cause
malfunction.
Using the Remote Shutter (optional)
If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake)
when using a tripod and you can keep the shutter pressed fully when taking pictures with
[B] (Bulb) or Burst Mode. The remote shutter works similar to the shutter button on the
camera.
Firmly connect the remote shutter to
the [REMOTE] socket on the camera as
far as it will go.
Take a picture.
1 Press the button lightly to press halfway.
2 Press the button fully to take the picture.
(Press it as far as it will go.)
DMC-GF1KPP-VQT2G44_eng.book 163 ページ ２００９年８月１７日 月曜日 午後１時１９分