Filter
Top Products
141
VQT2G44
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90o steps.
Select [ROTATE] on the [PLAYBACK] mode menu. (P28)
• The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press 2/1 to select the picture and then press
[MENU/SET].
• Motion pictures and protected pictures cannot be rotated.
Press 3/4 to select the direction to rotate the
picture and then press [MENU/SET].
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P28)
Note
• [ROTATE DISP.] can only be used with the lens compatible (P15) with the Direction Detection
Function (P37).
• When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
• It may not be possible to rotate pictures that have been recorded with other equipment.
• The picture will not rotate display when Multi Playback (P51) or Calendar Playback (P52) is
selected.
• Pictures recorded with the camera upside down will not be displayed rotated.
N [ROTATE]/M [ROTATE DISP.]
Rotate (The picture is rotated manually)
: The picture rotates clockwise in steps of 90o.
: The picture rotates counter-clockwise in steps of 90o.
Rotate display (The picture is automatically rotated and displayed)
Press
4
to select [ON] and then press [MENU/SET].
• The pictures are displayed without being rotated when you
select [OFF].
• Refer to P50 for information about how to play back pictures.
Press [MENU/SET] to close the menu.
DMC-GF1KPP-VQT2G44_eng.book 141 ページ ２００９年８月１７日 月曜日 午後１時１９分